Dear all
i am having some problem with the omron plc communication system. in our factory's control room we have 7 CJ1M and 2 CS1G CPU. so if we want to troubleshoot we just connect the CPU with a serial RS-232 cable with the Dekstop computer. so it is a problem for us check other CPU at the same time unless we disconnect the cable and put it to another.
now i want to connect these 7 CJ1M and 2 CS1G CPUs with the dekstop computer at the same time. in that case i dont have to disconnect the cable everytime. and i think i have do it if i want to make a HMI system for our process. i am using CX-Supervisor software to make the HMI.
please let me know how i make the connection of all these CPUs with the dekstop computer.
i am having some problem with the omron plc communication system. in our factory's control room we have 7 CJ1M and 2 CS1G CPU. so if we want to troubleshoot we just connect the CPU with a serial RS-232 cable with the Dekstop computer. so it is a problem for us check other CPU at the same time unless we disconnect the cable and put it to another.
now i want to connect these 7 CJ1M and 2 CS1G CPUs with the dekstop computer at the same time. in that case i dont have to disconnect the cable everytime. and i think i have do it if i want to make a HMI system for our process. i am using CX-Supervisor software to make the HMI.
please let me know how i make the connection of all these CPUs with the dekstop computer.