Matthias von Zorn
Member
Hey all. Ive a job coming up in which ive been given a choice of PLCS to use, the omron CS1 or the CJ1. I need to make these communicate with wonderware on a PC in the same panel. I was wondering if anyone had any advice on which plc to pick. Communicating with wonderware using wonderwares comms is a must (ie, no 3rd party comm drivers if possible). This is for a system with a couple heat zones, atmosphere control, and motion. Typically we use a SLC 5/05 with a 13 slot rack for this job, but are using customer supplied plc specs. Thanks in advance.
Matt
Matt