azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #16 In communications or in design and runtime ?
Donnchadh Lifetime Supporting Member D Join Date Jun 2002 Location Ireland Posts 1,004 Jan 27, 2015 #17 azakladnoy In communications or in design and runtime ? In the communications and then copy to runtime Donnchadh
azakladnoy In communications or in design and runtime ? In the communications and then copy to runtime Donnchadh
azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #18 With my PVP Plus 700 and 1769-L16ER-BB1B controller what should I choose for Design(Local) Tab ?
Donnchadh Lifetime Supporting Member D Join Date Jun 2002 Location Ireland Posts 1,004 Jan 27, 2015 #19 Hi Post a screen shot Donnchadh
azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #20 Here Is my comm. setup
Donnchadh Lifetime Supporting Member D Join Date Jun 2002 Location Ireland Posts 1,004 Jan 27, 2015 #21 Hi Delete the l1plc shortcut (sorry I worded it wrong i am not in front of my pc) Recreate the short cut using the same text Point it to the plc again and copy the short cut from design to the runtime Donnchadh
Hi Delete the l1plc shortcut (sorry I worded it wrong i am not in front of my pc) Recreate the short cut using the same text Point it to the plc again and copy the short cut from design to the runtime Donnchadh
azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #22 Still the same. What is " CIP connection (0) open rejected (Error 45337ba) on rout CompactLogix at 139.168.1.3 via cip://Backplane4. " means
Still the same. What is " CIP connection (0) open rejected (Error 45337ba) on rout CompactLogix at 139.168.1.3 via cip://Backplane4. " means
azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #23 OK thanks everyone for great help and support I will try tomorrow. Thanks for your valuable time.
Donnchadh Lifetime Supporting Member D Join Date Jun 2002 Location Ireland Posts 1,004 Jan 27, 2015 #24 Hi Not sure and I don't have my log in for the knowledge base with me. Is your pc connected to the plc locally or are you going via a managed switch Donnchadh
Hi Not sure and I don't have my log in for the knowledge base with me. Is your pc connected to the plc locally or are you going via a managed switch Donnchadh
azakladnoy Member OP A Join Date Jan 2015 Location Lincoln NE Posts 13 Jan 27, 2015 #25 It's local through regular unmanaged switch HMI- Ethernet SW- 1769L16- Laptop nothing else