Mickey
Lifetime Supporting Member
I am not a WinLog user so this is just a guess.
In the driver setup for winlog select the Allen Bradley SLC500/Micrologix DF1 Full Duplex driver.
This Winlog driver seems to be a direct connect to your SLC so you don't need RSLinx. Make sure RSLinx is shutdown and not running as a service. To avoid port conflicts.
What cable are you using? My guess is a null-modem cable is required.
In the driver setup for winlog select the Allen Bradley SLC500/Micrologix DF1 Full Duplex driver.
This Winlog driver seems to be a direct connect to your SLC so you don't need RSLinx. Make sure RSLinx is shutdown and not running as a service. To avoid port conflicts.
What cable are you using? My guess is a null-modem cable is required.