the_msp
Lifetime Supporting Member
I have a linux server (on prosumer hardware), debian stretch 10.
There was some utility works in my area and they hit the power line. The server is on a UPS but it drained as I was away.
Ever since, the server only boots for a while then shuts itself down. About 17 minutes after booting.
I pulled the log from dmesg, attached, can anyone spot anything that points to a specific piece of hardware before I start randomly replacing components?
I've tried it on mains only, the UPS isn't the issue. All the other hardware in the same server rack is fine.
There was some utility works in my area and they hit the power line. The server is on a UPS but it drained as I was away.
Ever since, the server only boots for a while then shuts itself down. About 17 minutes after booting.
I pulled the log from dmesg, attached, can anyone spot anything that points to a specific piece of hardware before I start randomly replacing components?
I've tried it on mains only, the UPS isn't the issue. All the other hardware in the same server rack is fine.