OT: Searching for Okuma Encoder cable

[alive15]

Good afternoon all, I'm searching for this style encoder cable that goes from an Okuma motor to Okuma drive. Unfortunately, Okuma does not make anymore. Does anyone know where I can find or make one from? See pictures. Goes from a MIV0404A-1-B5 drive into a BL-motor BL-ME80J-40TB; right angle or straight is fine, need about 7-10 meter length if possible.

Thanks,

 

[bob1371]

A little pricey but looks to be what you're after.

https://spwindustrial.com/okuma-3-p...30-ft-long-with-90-degree-circular-connector/

 

[goghie]

It is same as Mitsubishi on side of drive and it should be Molex. From the side of motor it looks like it is Amphenol or Souriau.