Tim Ganz
Member
About to install a new control panel we built and out wire numbers are 4-6 digits. We use the Brady heat shrink type labels for our wires but when pulling field wiring through conduit we need to label the wires in some way as there are many the same color but I don't want to put the expensive brady heat shrink labels on as the wires will have to be trimmed.
Is there a best method for temporary labeling and numbering or do I just bite the bullet and buy more Brady cartridges than I need.
I wanted to see what others do.
Is there a best method for temporary labeling and numbering or do I just bite the bullet and buy more Brady cartridges than I need.
I wanted to see what others do.