When I force the outputs, some of the LED’s on the card to not correspond to the tag. Pt00 through Pt03 send a signal to the correct outputs.
Pt04, Pt05, and Pt06 send signals to 9, 10, and 11 respectively, on a 5069-OB08 output card.
What would cause this?!?
Program tag Corresponding LED (slot 5)
Local:5:O.Pt00.Data 0
Local:5:O.Pt01.Data 1
Local:5:O.Pt02.Data 2
Local:5:O.Pt03.Data 3
Local:5:O.Pt04.Data 9
Local:5:O.Pt05.Data 10
Local:5:O.Pt06.Data 11
Pt04, Pt05, and Pt06 send signals to 9, 10, and 11 respectively, on a 5069-OB08 output card.
What would cause this?!?
Program tag Corresponding LED (slot 5)
Local:5:O.Pt00.Data 0
Local:5:O.Pt01.Data 1
Local:5:O.Pt02.Data 2
Local:5:O.Pt03.Data 3
Local:5:O.Pt04.Data 9
Local:5:O.Pt05.Data 10
Local:5:O.Pt06.Data 11