Hello everybody
I have some doubt,I have a SLC500,Panel view 600 and my computer all in the same ethernet network .
Now I am programming the panel view, but I don´t know why I can see how the SLC update the tags.
Only have 2 push button for the input and 2 display numeric for output. But not work.
I use B3:0/0 for the inputs. I don´t know if I can use I1:0/1 in the buttons.
I have exported all the tags from slc to Factory talk.
But I don´t know another way more easy for check it
Thanks advanced
Sorry by my english
I have some doubt,I have a SLC500,Panel view 600 and my computer all in the same ethernet network .
Now I am programming the panel view, but I don´t know why I can see how the SLC update the tags.
Only have 2 push button for the input and 2 display numeric for output. But not work.
I use B3:0/0 for the inputs. I don´t know if I can use I1:0/1 in the buttons.
I have exported all the tags from slc to Factory talk.
But I don´t know another way more easy for check it
Thanks advanced
Sorry by my english