Secpcb
Member
I want to add a Panelview 1000 (we have a couple stripped from old controls) to an existing SLC5/03 for displaying faults. Each PV1000 has a RS-232 and a RIO port.
I am guessing the RIO was for the operation and the RS-232 for programming.
Can they operate through the RS-232 to a DF-1 port on a SLC5/03? Or only program through it? No open slot on the SLC, or RIO adapter laying around here.
I am guessing the RIO was for the operation and the RS-232 for programming.
Can they operate through the RS-232 to a DF-1 port on a SLC5/03? Or only program through it? No open slot on the SLC, or RIO adapter laying around here.