terrymoran1968
Member
Hi
I have a panelview 1000 (2711-T10C3) on a machine with an app that runs when the screen is powered up.
The panelview is a touch screen, with two DH 485 ports and one RS232 port that is for a printer only. It is version 4.46
Could anyone tell me how to get to the config screen please. Rockwell say there should be a white block that appears at the bottom right of the screen during boot up, and that I should press this.
My problem is this does not appear. I have tried pressing the bottom right area of the screen anyway but it then shows an error on the blue screen that is present during the boot up sequence. The boot up then stops and i then have to power back down and up.
Can anybody help?
Thanks in advance
Terry
I have a panelview 1000 (2711-T10C3) on a machine with an app that runs when the screen is powered up.
The panelview is a touch screen, with two DH 485 ports and one RS232 port that is for a printer only. It is version 4.46
Could anyone tell me how to get to the config screen please. Rockwell say there should be a white block that appears at the bottom right of the screen during boot up, and that I should press this.
My problem is this does not appear. I have tried pressing the bottom right area of the screen anyway but it then shows an error on the blue screen that is present during the boot up sequence. The boot up then stops and i then have to power back down and up.
Can anybody help?
Thanks in advance
Terry