Hello. At work we've acquired an old tubing end former machine we're trying to get running. The machine came with 2 floppy disks that have .RSS, .PVA, and .PVB files. The PV seems to see the .PVA file on memory card but a few seconds after it tries to load it I get an "error file not supported 307" which RA manual says "File is incompatible with the terminal’s firmware."
PV #: 2711-B5A2
SER: F
REV: C
FRN: 3.01
When i power-up the PV is shows version 3.01.
So does that mean i need to update firmware? I've seen mention of using PanelBuilder 32, which we don't have, or a computer that we can use to communicate w/ DH485.
I'd appreciate any help you can send my way.
Marty
PV #: 2711-B5A2
SER: F
REV: C
FRN: 3.01
When i power-up the PV is shows version 3.01.
So does that mean i need to update firmware? I've seen mention of using PanelBuilder 32, which we don't have, or a computer that we can use to communicate w/ DH485.
I'd appreciate any help you can send my way.
Marty