Lucas_Corso123
Member
Hi.
I have a panelview 550 with a RIO port and RS-232 print port.
I can't download my application by RS-232 port using Panel Builder 3.82. I can see my panelview on RSLinx using DF1 driver.
When I discharge my application, appear the next message:
Error 4091- Application file is for an incompatible communication type.
I know that can upload/download applications by RS-232 print port.
On the menu Communication Setup in the Panelview, only appear RIO Configuration.
Is possible that my panelview only be programming by RIO Port??
Thanks.
I have a panelview 550 with a RIO port and RS-232 print port.
I can't download my application by RS-232 port using Panel Builder 3.82. I can see my panelview on RSLinx using DF1 driver.
When I discharge my application, appear the next message:
Error 4091- Application file is for an incompatible communication type.
I know that can upload/download applications by RS-232 print port.
On the menu Communication Setup in the Panelview, only appear RIO Configuration.
Is possible that my panelview only be programming by RIO Port??
Thanks.