Good Morning ,
We have a Panelview Plus 1000 ( 2711P-T12C6A2 ). DH+ and Ethernet.
( 2711P-RN6 Logic Module ) When we created a runtime , and downloaded to the HMI , we had DH+ information , but not the Ethernet communication with the ControlLogix PLC.
We ran the same runtime on the laptop that created the runtime , and the ethernet ran fine on the laptop , but it doesn't on the HMI .
The runtime was saved as a 5.1 , and downloaded. Used FactoryTalk View 11.0 . Could it be a firmware issue ?
Thanks so much , and have a great and safe day.
We have a Panelview Plus 1000 ( 2711P-T12C6A2 ). DH+ and Ethernet.
( 2711P-RN6 Logic Module ) When we created a runtime , and downloaded to the HMI , we had DH+ information , but not the Ethernet communication with the ControlLogix PLC.
We ran the same runtime on the laptop that created the runtime , and the ethernet ran fine on the laptop , but it doesn't on the HMI .
The runtime was saved as a 5.1 , and downloaded. Used FactoryTalk View 11.0 . Could it be a firmware issue ?
Thanks so much , and have a great and safe day.