Hi!, I need a answer for a problem that I can't find the solution, I work with two filter press, the control is by the panel mentioned, one of this is damaged, the damage is in the touch panel only. I bought a new one with the control installed on the HMI but I can't stablish the communication with the HMI and the PLC, the communitacion it's by ethernet and I tried different IP's the provider game me but none of this works, I thought in possible solution: find a way to get the IP adress of the damaged HMI, I tested the HMI communicating with a PC and it receives a response from the HMI, the only thing that I don't know is the IP, there is a way to find the IP in the damage HMI?