Currently have an old PV 600 hooked to the side port of a ML1500. Originally the driver in the Panelview was listed as -
-Serial-DF1
-Micrologix 1500 LRP,1
DH-485
But looking under channel configuration ( channel 1) in the ML1500 its setup as DF1 Full Duplex and working that way.
Moving on, I'm using a USB-Serial converter but cant the new PVP7 to communicate with the ML1500. Tried adding SErial-DF1 driver, also tried exporting configuration which brings over DH485 when importing. Tried switching USB ports in the back of the panelview.
-Serial-DF1
-Micrologix 1500 LRP,1
DH-485
But looking under channel configuration ( channel 1) in the ML1500 its setup as DF1 Full Duplex and working that way.
Moving on, I'm using a USB-Serial converter but cant the new PVP7 to communicate with the ML1500. Tried adding SErial-DF1 driver, also tried exporting configuration which brings over DH485 when importing. Tried switching USB ports in the back of the panelview.