peppin23joe
Member
Hi friends ....
I need your help with a machine where I have installed an Allen Bradley PanelView 6182 - AICZAC where I'm using the internet communication port right through a hub with an Allen Bradley SLC 500 5/05 and I have the following problem.
.. when active the control voltage to switch the PanelView and plc boots correctly but over a minute the program I have in the plc is cleared and the processor is in defautl mode ...
I wonder if someone could guide me in this problem I have with my machine .
I welcome your comments and thank you for your help
I need your help with a machine where I have installed an Allen Bradley PanelView 6182 - AICZAC where I'm using the internet communication port right through a hub with an Allen Bradley SLC 500 5/05 and I have the following problem.
.. when active the control voltage to switch the PanelView and plc boots correctly but over a minute the program I have in the plc is cleared and the processor is in defautl mode ...
I wonder if someone could guide me in this problem I have with my machine .
I welcome your comments and thank you for your help