Hi Guy's,
I have a project to link multiple HMI's to multiple PLC's that will all run the same process. I want to be able to call the mimic from any plc on any of the HMI's.
Platform for the control plc's are the Compactlogix L2 family with onboard I/O L24.
I also have put aside a 5380 L30ER plc to use as a master if needed to get this done.
HMI are the latest 10" Panelview +
Is there a way to indirectly address the plc's so the data can change dynamically on the HMI to display the various PLC data which have identical programs?
I have a project to link multiple HMI's to multiple PLC's that will all run the same process. I want to be able to call the mimic from any plc on any of the HMI's.
Platform for the control plc's are the Compactlogix L2 family with onboard I/O L24.
I also have put aside a 5380 L30ER plc to use as a master if needed to get this done.
HMI are the latest 10" Panelview +
Is there a way to indirectly address the plc's so the data can change dynamically on the HMI to display the various PLC data which have identical programs?