Dear friends,
I need your advice for a fault occurred in my HMI Allen-Bradely (panelview550) model:CAT 2711-B5A2.
This fault is an alarm says : (No Valid Application)!.
1- Advice me about this alarm please.
2- If this alarm means that the panel need to upload the application again, can i use a RAM to transfer
the application to this fault panel from identical panel having the same application ?..
3- The panel has no RAM card but it has a RAM card socket,also, i have no programming cable and no transferring software
(panel builder32)!.
Waiting for kind help
I need your advice for a fault occurred in my HMI Allen-Bradely (panelview550) model:CAT 2711-B5A2.
This fault is an alarm says : (No Valid Application)!.
1- Advice me about this alarm please.
2- If this alarm means that the panel need to upload the application again, can i use a RAM to transfer
the application to this fault panel from identical panel having the same application ?..
3- The panel has no RAM card but it has a RAM card socket,also, i have no programming cable and no transferring software
(panel builder32)!.
Waiting for kind help