dweinhold
Member
I am working on a 5/250 system with 3 scanners. 1 is faulted and causes problems with the DH+ comms. The system works when I remove the faulted scanner. Where in the configuration is the assignment to the I/O racks for each scanner? When I try to download the backup, it says the scanner is missing. I have tried to remove it, but it tells me that it is referenced, so I tried to change the BTR's & BTW's to have the new association, but it tells me "INVALID BLOCK TRANSFER DATA ADDRESS".
Bottom line, I am trying to move the I/O that was on the 3rd scanner to the 2nd scanner. There is a list function similar to the PLC3, but is only available online. Is there a way to edit the I/O association on the offline file.
Bottom line, I am trying to move the I/O that was on the 3rd scanner to the 2nd scanner. There is a list function similar to the PLC3, but is only available online. Is there a way to edit the I/O association on the offline file.
Last edited: