Hello All,
This is Vj and my project is to design and implement a PLC controlled XY table. The block diagram of the project is attached herewith . My concern is that the XY table should be able to carry 25 Kg of weight. So I need two heavy duty stepper motor to perform the operation. The PLC shoud be one which can be programmed using ladder logic and also be able to handle two motors, 5 push buttons and 2-3 sensors. Can anyone suggest any good PLC which I can purchase for the same ?
Thanks in advance
This is Vj and my project is to design and implement a PLC controlled XY table. The block diagram of the project is attached herewith . My concern is that the XY table should be able to carry 25 Kg of weight. So I need two heavy duty stepper motor to perform the operation. The PLC shoud be one which can be programmed using ladder logic and also be able to handle two motors, 5 push buttons and 2-3 sensors. Can anyone suggest any good PLC which I can purchase for the same ?
Thanks in advance