The IP address scrolling across the 1756-ENBT module display is 10.36.21.28. When I went to the setup screen on the panelview 600 display the IP address for the panelview is 10.36.21.27 and the gateway is 10.36.16.1 with the subnet mask being 255.255.240.0. I cannot change any IP addresses on my computer so how can I check that the 1756-ENBT card and panelview 600 are communicating to the network? This PLC loses its program about every 3 to 4 months
PLC to panelview 6000
- Thread starter mdwaldron
- Start date
Similar Topics
Hello,
I have a machine with a 1756-L72 Controllogix PLC and 1756-EN2T network card, and PanelView Plus 7 HMI. I am using RSLogix V20.05.00...
merry christmas and happy new year
i have a click c0-00dr-d and allen bradley 2711c-t3m. can the panelview talk to the click plc via modbus...
Hello all!
Can someone shed some light on this?
I am trying to connect a PVP 6 to a PLC-5/30 through the serial ports because the old touch...
Hello,
We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Last night electricians replaced the panelview and now there is no comms between the panelview and the PLC.
The processor is a 1747-L541 SLC 5/04...