shails0276
Member
Hi, For one of our project, We want to establish a Communication between the PLC5/80E Series E, Rev A and Compactlogix 1769-L35E. Both the PLCs are sharing same ethernet network. Has anybody previously done this type of communication using Message Instruction either in RSlogix5 or Rslogix5000.The distance between the two PLCs is around 100 m hence I think ethernet is the best way to go.Can we program message instruction in Rslogix5 for this particular application, because in the message setup screen you have to select the communication command and there is no option for Compactlogix.
Urgent Reply shall be highly appreciated.
Urgent Reply shall be highly appreciated.