These statements are not logical. Are you sure that it should not be:If S2 = High;
then M1 = High
if S2 = Low for 5 seconds;
then M1 = High
These statements are not logical. Are you sure that it should not be:
If S2 = Low for 5 seconds;
then M1 = Low
The problem for us is that none of us have your off-the-wall software, so any solution offered will be generic. A quick search for ITOH DENKI does not find any type of controller software. It may be obsolete.
Hello rr46278, if you can provied me with an excel file where you put the Digital-Inputs/Digital-Outputs, Analog-Inputs/Analog-Outputs. And a functional description I will be able to help you out
This is a new product.
Product description and layout
http://itohdenki.com/products/networked-cards/ibe-01
This is a new product.
Product description and layout
http://itohdenki.com/products/networked-cards/ibe-01
Okay, I found the software Itoh Configurator for EtherNet/IP (ICE) and got it up and running. Now it is just a matter of typing in the rungs for each bit of logic. Is the "Divert Setup.PDF" sheet that you first posted correct?