ahmed karm
Member
Hi All,
I am facing a problem I configure in my IO Configuration 2 new 1734-AENT each one has a tree of some RTD and some AI Modules
After i download the program i found that All my IO has that yellow triangle and fault code 16#000c Service request Error only the IO not the AENT
My configuration is :
1734-AENT : Rev 3.10
connection: Direct
RIP: 80
1756-EN2T : Rev 2.7
Connection : Direct
RSlogix5000 20.54
Also i can see all my IO on RSLINX and RSNETWOX
please if any one faced this problem just reply
I am facing a problem I configure in my IO Configuration 2 new 1734-AENT each one has a tree of some RTD and some AI Modules
After i download the program i found that All my IO has that yellow triangle and fault code 16#000c Service request Error only the IO not the AENT
My configuration is :
1734-AENT : Rev 3.10
connection: Direct
RIP: 80
1756-EN2T : Rev 2.7
Connection : Direct
RSlogix5000 20.54
Also i can see all my IO on RSLINX and RSNETWOX
please if any one faced this problem just reply