I appear to have another issue with point I/O, perhaps someone can throw some light on it.
I have a remote rack which has 41 cards,these cards are a mixture of 4 point input and output cards along with 2 channel analog input and ouput cards running on controllogix version 16.3.
The issue is, I have just added an additional card which is an 8 point input card, this card is all configured and running correctly, however, if inputs 1 to 4 are used and active all is as it should be, but if input 5 comes on then input 7 also comes on even though nothing is connected to it, this also happens if input 6 is turned on then input 8 also comes on.
Any ideas as to why this is the case?
Thanks
Steve
I have a remote rack which has 41 cards,these cards are a mixture of 4 point input and output cards along with 2 channel analog input and ouput cards running on controllogix version 16.3.
The issue is, I have just added an additional card which is an 8 point input card, this card is all configured and running correctly, however, if inputs 1 to 4 are used and active all is as it should be, but if input 5 comes on then input 7 also comes on even though nothing is connected to it, this also happens if input 6 is turned on then input 8 also comes on.
Any ideas as to why this is the case?
Thanks
Steve