TimothyMoulder
Member
Hi all,
Got a point io node, ethernet ip connection is fine. Problem is on the configuration Web page, reports 1 slot. Manually reset to our count + 1, but it reverts to 1 immediately.
Tried to browse chassis, got nothing but module not found, with 11 modules connected.
Must be missing something. Any thoughts?
Got a point io node, ethernet ip connection is fine. Problem is on the configuration Web page, reports 1 slot. Manually reset to our count + 1, but it reverts to 1 immediately.
Tried to browse chassis, got nothing but module not found, with 11 modules connected.
Must be missing something. Any thoughts?