Possibly Lowest Cost Large HMI/SCADA Display
- Thread starter Archie
- Start date
rdrast
Lifetime Supporting Member
I didn't even think of trying it on the older Pi's, just because of the lower speed. I'm still waiting for my Pi 2 (and 2.8" touch screen), apparently everything is held up for the bad weather around the country.
And yes, mono on the Pi runs .Net applications very well.
And yes, mono on the Pi runs .Net applications very well.
boardmaker
Member
Very nice!
Similar Topics
OK, I have a challenge for someone. I have a proface Sp-550 WA WXGA connected to a DM BOARD. Because of ,let's just say, an uncooperative company...
Hello,
I'm trying to teach myself some 'codesys'
I'm not new to PLC's but I am new to codesys specifically
I installed codesys V3.5 SP18 on the...
I recently went to install a new PV at one of our machines. Backstory
Old PV Part number
2711-T6C16L1 SER (B) REV (C) FRN (4.43)
New PV...
I came across this program, very short! lol.
Here's my situation: I have a customer that we've been building panels for for many years. They're a molten metal furnace manufacturer. Up until...