azecraze
Member
On a ML1200 I am working on, when I do a "Verify Project", I get this message:
IO Configuration -
"Warning:If using a 24 point I/O base, processor power supply may be overloaded."
Processor:
I=24
O=16
Add On Modules:
1 X 1762-OW16
3 X IF20F2
Question:
Is this base overloaded or not?
If it is, how do I increase the base rating?
By my reckoning this is a 40point I/O base and does not need upgrading. Am I correct?
The base margin is:
5V Current (mA) 160
24V Current (mA) -105
IO Configuration -
"Warning:If using a 24 point I/O base, processor power supply may be overloaded."
Processor:
I=24
O=16
Add On Modules:
1 X 1762-OW16
3 X IF20F2
Question:
Is this base overloaded or not?
If it is, how do I increase the base rating?
By my reckoning this is a 40point I/O base and does not need upgrading. Am I correct?
The base margin is:
5V Current (mA) 160
24V Current (mA) -105