I've attached the circuit diagram for a redundancy module. I'm a mech so bare with me. I'm trying to understand how this circuit is working to get an understanding of how my power distribution circuit is operating.
From what I read on the tech specs is that 2x40A inputs from the power supplies will output 1x80A from the redundancy module. But if one power supply would fail then the output from the redundancy module will drop to 40A and thus I am really only providing 40A of redundancy?
http://www.pulspower.com/index.php?reqNav=product&objectId=161
From what I read on the tech specs is that 2x40A inputs from the power supplies will output 1x80A from the redundancy module. But if one power supply would fail then the output from the redundancy module will drop to 40A and thus I am really only providing 40A of redundancy?
http://www.pulspower.com/index.php?reqNav=product&objectId=161