I have a powerflex 70 connected to a compactlogix L32E via a N-Tron 708tx switch. My problem is my L32E has stopped communicating with my drive.
A while back we had a short and it smoked my ethernet switch, I replaced the switch, but since then i lost comms to my drive. I thought since I got stray voltage thru the switch maybe it smoked the ethernet adapter, I have replaced the 20-COMM-E ethernet adapter, the patch cable, as well as the drive itself. Still nothing.My panelview plus 1250 communicates just fine (also on the ethernet). I get on to the controller and i can see it trying to connect to the drive, but then it says cannot connect. Any Ideas on what might have happened? I know my IP address is right, and all the parameters on the flex 70 are correct. I am at a loss.
A while back we had a short and it smoked my ethernet switch, I replaced the switch, but since then i lost comms to my drive. I thought since I got stray voltage thru the switch maybe it smoked the ethernet adapter, I have replaced the 20-COMM-E ethernet adapter, the patch cable, as well as the drive itself. Still nothing.My panelview plus 1250 communicates just fine (also on the ethernet). I get on to the controller and i can see it trying to connect to the drive, but then it says cannot connect. Any Ideas on what might have happened? I know my IP address is right, and all the parameters on the flex 70 are correct. I am at a loss.