janasamara
Member
Hi all, I am trying to configure powerflex 755 to work a close loop but I´m have trouble with autotune rotine. When I choose the rotate tune , the test starts normally and performs the static test successfully. Then when it is going to realize the movement of the axis occurs the following error: number 79( Excessive Load).
If I try to work without performing this test another error appears: error number 7 (motor overload) .
I am using an incremental encoder to do the feedback.
Can anyone help me?
Thank you
If I try to work without performing this test another error appears: error number 7 (motor overload) .
I am using an incremental encoder to do the feedback.
Can anyone help me?
Thank you