I have a line where I am giving the Powerflex DC Drive a reference of 9.86V which I verified with Drive Executive looking at the parameters. The motor RPM is 1750. So I am thinking this would give me roughly 175 RPM output, per volt input to the analog input 0-10V.
With the analog input of 9.86V, I am only getting 1602 rpm output. By my calculations, I should be getting an rpm output of 1725.5 rpm. Below is the drive information. A zipped Drive Executive Parameter File is too big to attach or I would have it also. Any help would be very appreciated.
Drive Info:
Allen-Bradley 50Hp PowerFlex DC Drive
Catalog # 20P41AD086RA0NNN
Series A
Frame A
Armature Amps 86
Field Amps 14
With the analog input of 9.86V, I am only getting 1602 rpm output. By my calculations, I should be getting an rpm output of 1725.5 rpm. Below is the drive information. A zipped Drive Executive Parameter File is too big to attach or I would have it also. Any help would be very appreciated.
Drive Info:
Allen-Bradley 50Hp PowerFlex DC Drive
Catalog # 20P41AD086RA0NNN
Series A
Frame A
Armature Amps 86
Field Amps 14