HI
when i just finished converting S5 program to S7, converting software reports number of errors and warnings.Same type of errors are aslo there.
Warning type-1:
Warning in Line52 S5 ASCII File:
*** FB 151, rel.Addr.0Hreheader does not exist.***
Warning type-2:
invalid release(product no.)********
Warning type-3:
Not different STOP commands.
Warning type-4:
Jump Instruction after DO cannot be compiled.(Use JL)
warning type-5:
Please check setting for time base (S7 config.)
error type-1:
Command not defined.***
LIR 0;
and also some times TIR 2;
also ASM 0;
error type-2:
Invalid operator.****
T BS 97;
also
L # DB_R;
also T # DB_T;
also L #DB_S
also L#DB_D
also L#DBPA;
Error type 3:
call FB 200;
thans is advance.
when i just finished converting S5 program to S7, converting software reports number of errors and warnings.Same type of errors are aslo there.
Warning type-1:
Warning in Line52 S5 ASCII File:
*** FB 151, rel.Addr.0Hreheader does not exist.***
Warning type-2:
invalid release(product no.)********
Warning type-3:
Not different STOP commands.
Warning type-4:
Jump Instruction after DO cannot be compiled.(Use JL)
warning type-5:
Please check setting for time base (S7 config.)
error type-1:
Command not defined.***
LIR 0;
and also some times TIR 2;
also ASM 0;
error type-2:
Invalid operator.****
T BS 97;
also
L # DB_R;
also T # DB_T;
also L #DB_S
also L#DB_D
also L#DBPA;
Error type 3:
call FB 200;
thans is advance.