zahidraza1212
Member
m using AB SLC-500 PLC and the processor is SLc 5/03.i want to implement the PID control on the bytronic inverted pendulum using this PLC.As a start,i m trying to understand the analog I/O's.i selected the range from 0v-10v from configuration and selected the channel-1,activated the channel and pressed ok.then the COP instruction appears on the Ladder program on its own.i applied the voltage from power supply to 0+ terminal of NI8.and varied the power.before this i used the SCP instruction in the manner
input I:4.0
inputmin 0
inputmax 32767
scaledmin 0
scaledmax 100
output N7:10
but no value i examined to be coming in the N:7 file.if any one can help me plz reply me very soon.
input I:4.0
inputmin 0
inputmax 32767
scaledmin 0
scaledmax 100
output N7:10
but no value i examined to be coming in the N:7 file.if any one can help me plz reply me very soon.