Hi guys,
I am new in siemens software and trying to go online with a plc S7 300 via router, this is what i have been doing, first i connect my vmware station to a wireless router, assign automatic IP address, the PLC is connected to the same router via cable.
when i set the pc/pg interfase it shows a good connection, but when I loof for available nodes, nothing appears, even i can ping the PLC and the aswer is pretty good.
I am using the Step7 professional V5.5 sp2, any help would be really appreciated!!!!
best regards
I am new in siemens software and trying to go online with a plc S7 300 via router, this is what i have been doing, first i connect my vmware station to a wireless router, assign automatic IP address, the PLC is connected to the same router via cable.
when i set the pc/pg interfase it shows a good connection, but when I loof for available nodes, nothing appears, even i can ping the PLC and the aswer is pretty good.
I am using the Step7 professional V5.5 sp2, any help would be really appreciated!!!!
best regards