HI all, I got some great help my last post here I hope this one goes as well. I am having a problem getting a Banner light to turn on. The light is a Dome light,with a part number of K50LGRYA120Q. I am using the AB SLC 500 platform, an SLC 5/04, 10 slot rack and have the light connected to a 1746-OW16 output card. I believe my problem is that the light is an LED light and the output card is a relay output card. Changing the card is not an option and the rack is full. If I toggel the output the light comes on, so I know the light is good and the output works. Does anyone know of a way to make this setup work? I suppose I could mount a relay and turn it on and off but the panel is allready crowded and quite messy to begin with, I really don't want to add anymore relays to it. The logic line up to the output is all working as it should, but when true the output refuses to turn on. I swappd out the card and this did not help. Any help would be greatly appreciated.