JRW Member Join Date Jun 2002 Location South Carolina Posts 2,301 Oct 22, 2013 #16 This is the DB's in the project I sent you- control and status word bits
JRW Member Join Date Jun 2002 Location South Carolina Posts 2,301 Oct 22, 2013 #17 put these DB's in your project. Use these for your FC1 and FC2 and test
marcius Member M Join Date Apr 2007 Location Klaipeda Posts 137 Oct 22, 2013 #18 Speed setpoint anything between 0 and 4000 hex will be 0 to 50 hz To start vfd set control word to 47F hex. To stop set control word to 47E hex. Actually there is a mistake in a example provided by JRW. He missed one control and status word bit.
Speed setpoint anything between 0 and 4000 hex will be 0 to 50 hz To start vfd set control word to 47F hex. To stop set control word to 47E hex. Actually there is a mistake in a example provided by JRW. He missed one control and status word bit.
JRW Member Join Date Jun 2002 Location South Carolina Posts 2,301 Oct 22, 2013 #20 yep I sure did- I cant do ALL his homework for him Take over for me Marcius Last edited: Oct 22, 2013
Sajjad Idrees Member OP S Join Date Feb 2013 Location Karachi Posts 9 Oct 27, 2013 #22 I am using DP send and recieve functions to establish communication between cpu and cp and this is working fine. And after that I am using move function to transfer values to dp slave (drive) but nothing is happening.
I am using DP send and recieve functions to establish communication between cpu and cp and this is working fine. And after that I am using move function to transfer values to dp slave (drive) but nothing is happening.
Sajjad Idrees Member OP S Join Date Feb 2013 Location Karachi Posts 9 Oct 27, 2013 #23 Thanks all. I got it working and it is working perfect now. Thanks one again.