g6ivang3
Member
hello this is my 1st post but I have read many on here. im a novice when it comes to plcs, I actually have no training. at my present job these duties where just handed to me for no apparent reason lol anyway getting to the point I read in another point about doing a proportional band approach instead of the more complicated PID
So im using
Rslogix 500
micrologix 1100 with 1762-if2of2 module
vegason 61 sonar sensor
acs550 abb vfd
what I have is a tank where the level is read by the vegason61 (4-20ma)what I need is for the vfd to slow down my pump when the tank is 20% and max speed when the tank is 80%.
So im using
Rslogix 500
micrologix 1100 with 1762-if2of2 module
vegason 61 sonar sensor
acs550 abb vfd
what I have is a tank where the level is read by the vegason61 (4-20ma)what I need is for the vfd to slow down my pump when the tank is 20% and max speed when the tank is 80%.