Whilst commissioning a system using a CompactLogix 1769-L24ER-QBFC1B we have accidentally shorted an output to ground causing the output to stop working.
I can't find any information about replacement of fuses or resetting.
All other embedded I/O work fine so the fault is isolated to that one channel.
Does anyone know whether there is any protection on the embedded outputs or do we have to replace the PLC to rectify the problem!?
Many thanks in advance
I can't find any information about replacement of fuses or resetting.
All other embedded I/O work fine so the fault is isolated to that one channel.
Does anyone know whether there is any protection on the embedded outputs or do we have to replace the PLC to rectify the problem!?
Many thanks in advance