JoeTech
Member
I am upgrading a 550 to a PVP +6 600. I have the program done and am able to test it on my laptop connecting serial to SLC and DH+ for rs500 to monitor PLC program. Everything works fine (had to debug a couple of variables and such). 100% working in FTWiew. Copied from design time to runtime and changed com port to 1 For Panelview.
Laptop Serial Setup:
Com 4 19200, 8, n ,1 CRC, DF1 station number 2
I have tried using different com ports on PVP and always times out.
And I only forgot to switch the RS232 cable once.
Been messing with this for 10 hrs now and need some of your wise assistance.
Thanks to all
Laptop Serial Setup:
Com 4 19200, 8, n ,1 CRC, DF1 station number 2
I have tried using different com ports on PVP and always times out.
And I only forgot to switch the RS232 cable once.
Been messing with this for 10 hrs now and need some of your wise assistance.
Thanks to all