Lock Breatherman
Member
I am currently having issues with a USB being plugged into the back of a PVP7 terminal. The HMI is not even acknowledging the storage device on the station or on the Windows application.
I wrote a data logging program and plan to write the data to the USB. For some reason, my personal USB will be recognized, but the USBs we purchased for the project will not work at all.
I have tried to format each USB to A similar representation of each other, but no luck. The only real difference between the two is the storage capacity (64Gb ((no worky)) vs. 2Gb ((worky)))
Lemme know if yall have any ideas whats the problem.
Thanks
I wrote a data logging program and plan to write the data to the USB. For some reason, my personal USB will be recognized, but the USBs we purchased for the project will not work at all.
I have tried to format each USB to A similar representation of each other, but no luck. The only real difference between the two is the storage capacity (64Gb ((no worky)) vs. 2Gb ((worky)))
Lemme know if yall have any ideas whats the problem.
Thanks