habit04
Member
Hello everybody...
I am new to GE Fanuc equipment and I am building screens for a QuickPanel View STN 6".
I am wanting to use a momentary button that when pressed will turn a bit on then off in the PLC. We will be using a 90-30 PLC in one location and a versa max plc in another. The bit I need to change state will be a internal bit.
At the same time I want the current window to close and go back to the process screen.
Also we we will be communication via ethernet if that matters?
I am using Proficy Machine Edition v5.60
Thanks in advance.
I am new to GE Fanuc equipment and I am building screens for a QuickPanel View STN 6".
I am wanting to use a momentary button that when pressed will turn a bit on then off in the PLC. We will be using a 90-30 PLC in one location and a versa max plc in another. The bit I need to change state will be a internal bit.
At the same time I want the current window to close and go back to the process screen.
Also we we will be communication via ethernet if that matters?
I am using Proficy Machine Edition v5.60
Thanks in advance.