kevinksdroid
Member
Hi, Rockwell beginner here, so I have been trying to set up an HMI Screen in Panelview PLus 1000, which would tell the customer if a link is broken in a DLR network. The architecture has 5 Point IOs configured in a Ring with Stratix 5700 Switch. The PLC is not in this ring, only the IOs are configured in the ring. My goal is to read the network or port status of the IOs. I have been searching around for quite some time. The sample program from PCDC seem to have an HMI screen that reads the port status of Stratix 5700 and nothing is mentioned about the port status of Point IOs. Any help will be much appreciated.