balash
Member
what about db1,word0 or db1,int0 (according to the manual)?
Read DataBlock from S7-1200 To kepsver!?
- Thread starter hassanayoub85
- Start date
Similar Topics
Hello,
I have a little experience with Siemens programming and am now starting a larger project. I am writing a program that will accept a...
Hi,
The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001.
I will set the flow meter...
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Hi everyone
i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Hi
Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer).
In this I want to read a data from hmi to plc.
The data was like...