Hi,
The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001.
I will set the flow meter to the following:
Sp1 = 34 litres per minute
rP1= 0
ImPs = 0.25 litres.
P-n = PnP
We will not need high speed input or outputs. The max pulses per minute will be 136. ( 34 X 0.25 )
The objective of this project is to read the pulses from a magnetic-inductive flow meter ( Prosense FMM100-001) and modify the pulses by a user inputted valve ( ie increase pulse rate by 20% ) and to output the modified rate to another pulse reader.
Can you write the Plc code to achieve this ?
The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001.
I will set the flow meter to the following:
Sp1 = 34 litres per minute
rP1= 0
ImPs = 0.25 litres.
P-n = PnP
We will not need high speed input or outputs. The max pulses per minute will be 136. ( 34 X 0.25 )
The objective of this project is to read the pulses from a magnetic-inductive flow meter ( Prosense FMM100-001) and modify the pulses by a user inputted valve ( ie increase pulse rate by 20% ) and to output the modified rate to another pulse reader.
Can you write the Plc code to achieve this ?