Tim Ganz
Member
We have a PanelView 1000 2711P-RP1A Series E Rev G that failed and won't power up. Unfortunately, this is a large and complex application and there is no backup of it.
I was hoping to maybe disassemble it and see if I can take out the hard drive or flash memory and slave it to another machine and see if I can recover it.
Has anyone ever done this or had any success? Not sure if the hard drive / or flash storage is soldered in place?
I was hoping to maybe disassemble it and see if I can take out the hard drive or flash memory and slave it to another machine and see if I can recover it.
Has anyone ever done this or had any success? Not sure if the hard drive / or flash storage is soldered in place?