Hi all,
I have a very basic question.
I'm using a G310 Red Lion HMI connected to a Allen Bradley Micrologix 1500 LRP via the serial port.
I want to add a second Red Lion G3 (a G306) to the system, showing the same screens as the first HMI.
What is it the best approach?
Can I connect the two HMIs using their ethernet port? If so, how?
Thank you!
I have a very basic question.
I'm using a G310 Red Lion HMI connected to a Allen Bradley Micrologix 1500 LRP via the serial port.
I want to add a second Red Lion G3 (a G306) to the system, showing the same screens as the first HMI.
What is it the best approach?
Can I connect the two HMIs using their ethernet port? If so, how?
Thank you!