kenjohn Member K Join Date Aug 2010 Location Colorado Posts 18 Sep 10, 2010 #1 Why is this the case? "The Red Lion G3 HMI's and Modular controllers can only be the TCP/IP slaves to devices not the master, so be sure to specify Modbus TCP/IP." KJ Last edited: Sep 10, 2010
Why is this the case? "The Red Lion G3 HMI's and Modular controllers can only be the TCP/IP slaves to devices not the master, so be sure to specify Modbus TCP/IP." KJ
JeremyH Member Join Date Aug 2006 Location York, PA Posts 560 Sep 10, 2010 #2 Hello, In most cases the G3 and/or Modular Controller will actually be the master on TCP/IP. May I ask where this sentence you posted came from? Thanks Jeremy
Hello, In most cases the G3 and/or Modular Controller will actually be the master on TCP/IP. May I ask where this sentence you posted came from? Thanks Jeremy
kenjohn Member OP K Join Date Aug 2010 Location Colorado Posts 18 Sep 10, 2010 #3 Can we go offline to discuss that? Appreciate your chiming in! KJ
kenjohn Member OP K Join Date Aug 2010 Location Colorado Posts 18 Sep 10, 2010 #4 I sent a PM, Thanks, KJ
manish_kol Member M Join Date Sep 2010 Location kolkata Posts 11 May 7, 2011 #5 One of my client want to communicate MP270(sIEMENS Operator Panel)with ABB AC800M processor .Is it possible Last edited: May 7, 2011
One of my client want to communicate MP270(sIEMENS Operator Panel)with ABB AC800M processor .Is it possible
manish_kol Member M Join Date Sep 2010 Location kolkata Posts 11 May 7, 2011 #6 One of my client want to communicate op(sIEMENS Operator Panel)with ABB AC800M processor .Is it possible
One of my client want to communicate op(sIEMENS Operator Panel)with ABB AC800M processor .Is it possible