mike4766
Member
Hello ALL,
I am having problems setting up comms between Redlion G07 and Automation Direct Click PLC.
If the drop numbers (and baud etc) are set identically in both the HMI and PLC then both the Tx and Rx on the PLC lights blink. (indicating PLC is ok?).But i have solid redlight and blinking green on RS-485 port (RS-232)on hmi.i tried using both RS-485 and RS- 232
If the drop number assigned to the PLC slave is anything other than '0' (in the HMI com port set up as assigned to the Click) then I get CommError=2 on the HMI.
Please Help Me!
I am having problems setting up comms between Redlion G07 and Automation Direct Click PLC.
If the drop numbers (and baud etc) are set identically in both the HMI and PLC then both the Tx and Rx on the PLC lights blink. (indicating PLC is ok?).But i have solid redlight and blinking green on RS-485 port (RS-232)on hmi.i tried using both RS-485 and RS- 232
If the drop number assigned to the PLC slave is anything other than '0' (in the HMI com port set up as assigned to the Click) then I get CommError=2 on the HMI.
Please Help Me!